板材冲压成形有限元数值模拟界面摩擦约束处理方法

基于弹塑性大变形板材冲压成形增量有限元法,采用线性弹簧单元提出一种空间三维板材冲压成形等效界面摩擦力的处理方法.这种方法的优点是可以反映界面摩擦力的同步、被动产生效果,同时它还可以保证约束后刚度矩阵的对称性.将提出的摩擦约束处理算法引入自主开发的板材成形模拟软件FASTAMP,计算了汽车油底壳的成形过程,计算结果的厚度分布与实际冲压件吻合比较好,验证了等效界面摩擦力约束处理方法的有效性.     

A quasi-flow constitutive model with strain-rate dependence

In this paper, the proposed is a quasi-flow constitutive model with strain-rate sensitivity for elastic plastic large deformation. The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated. The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model. The project supported by the Scientific Foundation of National Outstanding Youth of China (10125208), the National Natural Science Foundation of China (19832020), and the National Education Committee of China     

Synthesis, spectroscopic characterization, DFT studies and biological assays of a novel gold(I) complex with 2-mercaptothiazoline

A new gold(I) complex with 2-mercaptothiazoline (MTZ) with the coordination formula [AuCN(C₃H₅NS₂)] was synthesized and characterized by chemical and spectroscopic measurements, DFT studies and biological assays. Infrared (IR) and ¹H, ¹³C and ¹⁵N nuclear magnetic resonance (NMR) spectroscopic measurements indicate coordination of the ligand to gold(I) through the nitrogen atom. Studies based on DFT confirmed nitrogen coordination to gold(I) as a minimum of the potential energy surface with calculations of the hessians showing no imaginary frequencies. Thermal decomposition starts at temperatures near 160 °C, leading to the formation of Au⁰ as the final residue at 1000 °C. The gold(I) complex with 2-mercaptothiazoline (Au-MTZ) is soluble in dimethyl sulfoxide (DMSO), and is insoluble in water, methanol, ethanol, acetonitrile and hexane. The antibacterial activities of the Au-MTZ complex were evaluated by an antibiogram assay using the disc diffusion method. The compound showed an effective antibacterial activity against Staphylococcus aureus (Gram-positive) and Escherichia coli and Pseudomonas aeruginosa (Gram-negative) bacterial cells. Biological analysis for evaluation of the cytotoxic effect of the Au-MTZ complex was performed using HeLa cells derived from human cervical adenocarcinoma. The complex presented a potent cytotoxic activity, inducing 85% of cell death at a concentration of 2.0 μmol L⁻¹.     

超支化聚磷酸酯阻燃剂对尼龙6的成炭促进作用

以三氯氧磷和双酚A为原料制备了具有超支化结构的聚磷酸酯阻燃剂(HPPEA),通过红外(FTIR),核磁(1H-NMR,31P-NMR)及热重分析表征了产物的结构和热稳定性.将HPPEA与三聚氰胺聚磷酸盐(MPP)进行复配,通过熔融共混法制备阻燃尼龙6,通过氧指数法和垂直燃烧法测试了其阻燃性能,采用热重分析(TGA)研究...     

Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels

Recently non-proportional deformation has received increased attention from researchers working in the area of experimental and computational modeling of metal deformation. However, most of them are numerical in nature with limited experimental data available, making it further difficult to model non-proportional deformation. In the present work, two-stage uniaxial tests, along with uniaxial cyclic and biaxial tests for different stress ratios, have been performed to evaluate deformation behavior of ultra-low carbon high strength automotive steel. Behaviors like cross-effect and hardening stagnation, which are attributed to the evolution of complex dislocation structures, were observed in this steel. It was also noticed that this steel exhibits tension-compression asymmetry. As for constitutive modeling, a modified asymmetric yield function is proposed to be used with a combined isotropic-kinematic hardening model. Also methods to account for the hardening stagnation during reverse loading and the cross-effect during two-stage deformation are proposed. The resulting constitutive model showed reasonably good agreement with experimental results.     

蓖麻油聚氧乙烯醚水基润滑液摩擦学特性研究

本文以蓖麻油聚氧乙烯醚水基润滑液为研究对象,分别使用润滑膜厚度测量仪、微摩擦试验机和四球摩擦试验机对其成膜特性、摩擦磨损特性和抗磨极压特性进行了系统的研究,并用扫描电子显微镜和能量色散光谱仪对摩擦磨损机制进行了分析。结果表明：蓖麻油聚氧乙烯醚提高了纯水的成膜能力,能够在钢-铝摩擦副形成有效的润滑膜,起到良好的减摩抗磨效果。随着浓度的增大,对钢-铝摩擦副的减摩抗磨性能和四球摩擦试验的抗磨极压性能都得到了提高。     

基于刚（粘）塑性流动理论的自然单元法研究

将自然单元法与刚（粘）塑性流动理论相结合,对自然单元法在金属塑性成形过程数值模拟中的应用进行了研究。采用基于Voronoi图和Delaunay三角化结构的Non-Sibsonian插值方法构造近似速度场向量,实现无网格方法中速度边界条件的直接精确施加,提出了基于刚（粘）塑性流动理论的无网格自然单元法。运用不完全广义变分...     

Surface-enhanced Raman scattering effect of gold nanoparticle arrays: The influence of annealing temperature,excitation power and array thickness

Gold nanoparticle arrays are fabricated for surface-enhanced Raman scattering (SERS) and the effect of the annealing temperature, the thickness of nanoparticle array and the exciting power on the SERS signals are investigated. The particle distribution and particle size are dense and uniform on the glass substrate when the 10 nm gold film was annealed at 250 °C and strong SERS signals for Rhodamine 6G were achieved via a 532 nm excitation with a 10 mW power. The SERS signal at 1650 cm⁻¹ is enhanced more than 10 times as compared to that of the gold film without annealing. The strong SERS behavior of gold nanoparticle arrays may broaden the SERS applications in biomedical and analytical chemistry.     

1，3—Diphenyl—5—（9—phenanthry1）—2—pyrazoline（DPPhP）：An Excellent Ho1e—Transport Material for Use in Organic Light—Emitting Diodes

An excellent hole-transport material,1,3-diphenyl-5-(9-phenanthryl)-2-pyrazoline(DPPhP)for OLEDs was studied.This compound not only offers hlgh glass transition temperature(Tg=96℃）,good film forming ability,and high HOMO energy level,but also displays excellent hole-transport property.The electrlumlnescent device with a simple structure of ITO/DPPhP(60nm)/AIQ(60mm)/LiF(0.8nm)/Al shows an external quantom efficiency as high as 1.6?     

掺氟高温超导体的化学问题

在综述掺氟高温超导体的主要类型与性质的基础上，分析了其中存在的无机结构及固态合成的化学动力学问题，探讨制备新型掺氟及全氟化物的高温超导体的可能性。